100% mycelium Mini B+ | 600cc mushroom growkit

Nouveau en stock chez Avalon , le mini Grow box de champignons B+ (565 ml). Ce champignons B+ installé est la meilleure facon de faire pousser vos champignons B+ a la maison.

Vous n'avez qu'a ajouter de l'eau du robinet dans la boite de culture a champignons une fois. Après 12 heures , laisser couler l'eau en excès de la boite et placer la dans le sac plastique fourni.

Placer la boite et le filtre du sac dans un endroit lumineux (mais surtout pas en plein soleil)
Après plusieurs semaines, vous verrez vos champignons magiques B+ venir a la vie !!!

Il s'agit de la version mini de notre grow box.
(visitez notre manuel en ligne sur Manual)

Le mini-grow box est un excellent produit nouveau de notre stock et un moyen facile et pas cher pour cultiver et pour essayer plusieurs souches de champignons a la fois.

Ce mini grow box mycélium contient la souche du mycélium du champignon magique B+

Le mycélium du B+ a colonisé un substrat de seigle et de perlite. La couche supérieure est de la vermiculite.

Pour stocker votre mini grow box de mycélium , votre frigo est le meilleur endroit.(Surtout pas votre congélateur!) si vous ne souhaitiez pas faire croitre votre excellent et unique grow box immédiatement. Profitez et amusez-vous a faire vos propre champignons B+.

RESTRICTIONS D'EXPEDITION: Pour UK, USA, Australie,Maurice,Réunion,Afrique du Sud , Japon, Canada, Suisse, Nouvelle Zélande.

CONTACTEZ NOUS EN CAS DE DOUTE POUR LES EXPEDITIONS DE MYCELLIUM

What you need:

- A filled water spray with clean (tap)water.

- A light (no direct sunlight) place with a temperature between 18°C and 30°C (Idealy 23°C).
 

Work hygienic at all times!

- Do not breathe or cough inside the bag.

- Always wash your hands before you start working on your cultivation! You may have touched mold, it’s in the air, it’s everywhere and you don’t want to contaminate your precious!

Step 1

Take the Grow Kit, plastic bag and paperclip out of the box. Remove the lid of the Grow Kit (store the lid properly). Rinse the lid under running water. You will need it again later.

Step 2

Place the grow kit without lid in the plastic (supplied) bag. Slide the opening of the bag under the bottom with the micro perforation pointing upwards. The opening of the bag is now largely closed. You do not have to worry about air circulation.

Step 3

From the moment you see the first small mushrooms (see photo), you can put the bag upright. Do not water. The first magic mushrooms will be visible after about 1 week.

 

Step 4

Place the Grow Kit in an area with enough daylight and at a temperature between 18 °C and 28 °C. NEVER place the grow kit in direct sunlight. Although mushrooms will grow at almost any temperature above 15 °C, 23 °C is the ideal temperature for an optimal harvest. Special heat mats are available to ensure this temperature and not have to heat the entire room.

Step 5

In this phase (see photo), leave the bag slightly open, so that the moisture can evaporate a little. Too much moisture is not good. Your first harvest will be about a week after the appearance of the first pellets. Make sure you harvest before the first spores begin to fall!

 

Freshmushrooms grow kits produce their first harvest fairly quickly. The first buds are already visible after only 1 week. Low and high temperatures may slightly delay this growth process. As soon as the first shrooms are visible it usually takes about one week before the mushrooms are fully developed.



The moment of harvesting is extremely important. If the spores under the caps are still closed but threaten to burst or let go by the power of the caps, the time has come to harvest.
 

Step 6

These kits produce several mushroom harvests. To do so, fill the kit with clean tap water after the first harvest. This process is known as cold shock. It breathes new life into the mycelium and ensures that enough moisture is present for the mushrooms to grow.

Step 7

Place the lid of the Grow Kit back on the kit. Let the kit rest for 12 hours. Open a corner of the lid and drain the excess water. From here you can follow the instructions from step 1 again. This process can be repeated several times.