Yellow acrylic bong with a bubble base
The colour is the first thing you notice on this bong: solid, opaque yellow across the whole body, trimmed with black at the bottom and at the top. A round water chamber sits at the base, and a straight tube rises from it and ends in a black ring. That ring forms the mouthpiece and sits rounded against your lips, which is kinder than a bare acrylic edge.
The chillum and bowl are metal and enter the chamber at an angle. On the opposite side of that chamber there is a kickhole finished with a black rubber grommet. You cover the hole with a finger while you pull and release it at the end, so the chamber clears in one go. The rubber rim helps your finger seal properly and keeps the edge from feeling sharp.
Comes apart, easy to clean
The black foot is a separate component and screws off the water chamber. The chillum pulls out of its rubber grommet and the bowl unscrews from the stem. That leaves you with a handful of loose parts that pack down neatly in a bag and can be rinsed one by one. Use lukewarm water and a drop of washing up liquid; skip the boiling water and the harsh cleaners, because acrylic does not take that kind of heat well.
Acrylic instead of glass
Acrylic weighs less than glass and gives on impact rather than breaking. That matters most when the bong is passed around a lot or leaves the house. The flip side is that acrylic is softer and picks up scratches sooner, which shows quickly on a solid colour like this one. Storing it on its own rather than loose among keys and lighters keeps the finish clean.
At Avalon Magic Plants you will find more acrylic models, such as the Acrylic Bong All-Over-Print with its graffiti artwork and the straight 51 cm acrylic bong medium.
